UAV Motor Rotor Stator Lamination Supplier
Motor Rotor Stator – Matched Lamination Sets for UAV & Drone Propulsion Motors
UAV motor performance limited by mismatched rotor and stator? Need a complete lamination solution for your drone? The motor rotor stator are the two fundamental magnetic components of every brushless motor—the stator lamination that generates the rotating magnetic field and the rotor lamination that converts that field into mechanical torque. As a specialist UAV motor rotor stator lamination supplier, Reenives delivers precision-matched lamination sets with 0.2mm ultra-thin silicon steel, 12N14P or 24N22P configurations, burr height < 0.03mm, and epoxy coating—reducing core loss by up to 30%, optimizing the air gap for maximum torque density, and delivering reliable, efficient propulsion for UAV, FPV, and eVTOL applications.
- • What Are Motor Rotor and Stator Laminations?
- • Classification of Rotor & Stator Lamination Sets
- • Technical Specifications & Verified Data
- • Applications: FPV Racing, UAV Logistics, eVTOL & More
- • 6-Step Engineering Selection Guide for Rotor & Stator Sets
- • FAQ: Motor Rotor & Stator Lamination Technical Questions
- • Why Reenives – UAV Motor Rotor Stator Lamination Supplier
- • Dongguan Runlu Motor Technology Co., Ltd.
What Are Motor Rotor and Stator Laminations?
Motor rotor stator laminations are the precision-stamped silicon steel components that form the two magnetic cores of a brushless DC motor. The stator is the stationary core with teeth that receive copper windings, generating the rotating magnetic field. The rotor is the rotating core that carries permanent magnets and follows the stator's field to produce torque.
Why matched rotor-stator lamination sets are critical for UAV motors:
- Optimized air gap – Precision-matched components ensure consistent air gap for maximum magnetic coupling
- Eddy current reduction – Thin laminations (0.15–0.20mm) minimize core loss in both rotor and stator
- Torque density – Matched magnetic circuits maximize torque output per unit weight
- Reduced cogging – Precision geometry ensures smooth rotation and minimal cogging torque
- Outrunner configuration – The rotor spins on the outside of the stator, delivering high torque for direct-drive propellers
ⓘ Motor rotor stator insight: "A perfectly matched rotor and stator lamination set is the foundation of every high-efficiency brushless motor. The precision of the magnetic circuit determines torque density, thermal stability, and overall flight performance."
Reenives manufactures precision-matched rotor and stator lamination sets for UAV motors using imported 0.2mm silicon steel, progressive stamping dies, and automated epoxy powder coating—delivering optimal magnetic performance for demanding UAV, FPV, and eVTOL applications.
Classification of Rotor & Stator Lamination Sets
Reenives supplies matched rotor and stator lamination sets across four primary series, tailored to different drone classes and performance requirements:
| Series | Stator OD (mm) | Slot/Pole Configuration | Lamination Thickness | Best For |
|---|---|---|---|---|
| Series A – Micro FPV | 12–20mm | 9N12P | 0.15–0.20mm | Micro drones, tiny whoops, sub-100g FPV |
| Series B – FPV Racing | 22–30mm | 9N12P, 12N14P | 0.15–0.20mm | 3–5 inch FPV racing drones, freestyle |
| Series C – Mid-Size UAV | 30–50mm | 12N14P, 24N22P | 0.20mm | Logistics drones, camera platforms, agriculture |
| Series D – Heavy-Lift & eVTOL | 50–80mm | 24N22P, 36N30P | 0.20mm | Heavy-lift UAVs, eVTOL, cargo drones |
Matched rotor and stator lamination sets are optimized for specific UAV applications:
- 12N14P: Near-perfect winding factor (0.933), low cogging—most popular for UAV motors
- 9N12P: High RPM, responsive throttle—ideal for FPV racing motors
- 24N22P: High torque, low cogging—logistics and agriculture UAVs
- 36N30P: Maximum torque density—eVTOL and heavy-lift applications
Technical Specifications & Verified Data
All performance data below is derived from Reenives in-house laboratory testing (IEC 60404-2), third-party validation, and industry standards for motor rotor and stator laminations.
| Parameter | Value / Range (Reenives Standard) | Test Standard / Source |
|---|---|---|
| Stator Outer Diameter | 12–80mm (customizable) | CMM / optical comparator |
| Rotor Outer Diameter | Matched to stator design | CMM / optical comparator |
| Material Type | Silicon steel (CRNGO / Non-oriented) | Material certificates / IEC 60404 |
| Common Grades | 35PN210, 35PN250, 20PN120 (Nippon Steel / Baowu) | Material certificates |
| Lamination Thickness | 0.15mm / 0.20mm / 0.35mm (customizable) | Micrometer / IEC 60404-2 |
| Core Loss @ 1.0T, 400Hz (0.20mm) | ≤ 8.5 W/kg — 30% lower than 0.35mm | IEC 60404-2 / Reenives R&D |
| Saturation Flux Density Bs | 1.68 – 1.72 T | Epstein frame test |
| Burr Height (max) | < 0.03mm | Optical measurement |
| Epoxy Coating Thickness | 30–60 µm, dielectric > 2.5 kV | ASTM D149 |
| Stacking Factor | ≥ 97.5% | Weight method |
| Concentricity Tolerance | ±0.01mm – ±0.015mm | CMM measurement |
| Slot/Pole Configurations | 9N12P, 12N14P, 24N22P, 36N30P, custom | Reenives design standards |
| Typical UAV Motor Efficiency | 90–95% (with matched rotor-stator set) | IEEE Xplore / FEM simulation |
| Flight Time Improvement | 8–12% (vs. standard 0.35mm laminations) | Reenives R&D / field testing |
🔬 Data Source: Reenives R&D Report 2024-Q4 + IEC 60404-2 standard + Material certificates + Industry benchmarks.
Applications: FPV Racing, UAV Logistics, eVTOL & More
Matched motor rotor and stator lamination sets power the full spectrum of UAV applications:
| Application | Typical Stator Size | Configuration | Performance Priorities |
|---|---|---|---|
| FPV Racing Drones | 22–30mm | 9N12P, 12N14P | High RPM, rapid acceleration, responsiveness |
| Freestyle / Cinematic FPV | 22–30mm | 12N14P | Smooth torque, thermal stability, consistent power |
| UAV Logistics & Delivery | 30–50mm | 12N14P, 24N22P | Long flight time, payload capacity, reliability |
| UAV Agriculture Spraying | 40–60mm | 24N22P, corrosion-resistant coating | Heavy payload, dust/chemical resistance, power |
| eVTOL / Air Taxi | 50–80mm | 24N22P, 36N30P | Safety, redundancy, high continuous power |
| Micro / Tiny Whoop FPV | 12–20mm | 9N12P | Weight reduction, efficiency at low power |
"A perfectly matched rotor and stator lamination set is the foundation of every high-efficiency brushless motor. The precision of the magnetic circuit determines torque density, thermal stability, and overall flight performance."
6-Step Engineering Selection Guide for Rotor & Stator Sets
For UAV motor designers and procurement engineers, selecting the optimal motor rotor and stator lamination set requires systematic evaluation. Here is a practical 6-step framework:
- Define UAV Class & Performance Requirements – Identify your drone's mission profile:
- FPV racing: High RPM, rapid acceleration, lightweight
- FPV freestyle: Smooth control, consistent power, cooling
- UAV logistics: Long flight time, high payload, efficiency
- UAV agriculture: Heavy lift, dust/chemical resistance, durability
- eVTOL: Safety, redundancy, high continuous power
- Select Stator Outer Diameter – Match motor size to UAV class:
- 12–20mm: Micro drones, tiny whoops
- 22–30mm: FPV racing, freestyle (most popular)
- 30–50mm: Logistics, agriculture, camera platforms
- 50–80mm: Heavy-lift, eVTOL, cargo drones
- 60–200mm: High-power/eVTOL (15–50+ kW)
- Choose Slot/Pole Configuration – Critical for motor torque and efficiency:
- 9N12P: High RPM, responsive—FPV racing motors
- 12N14P: Near-perfect winding factor (0.933)—most popular for UAVs
- 24N22P: High torque, low cogging—heavy-lift applications
- 36N30P: Maximum torque density—eVTOL
ⓘ "0.20mm laminations reduce core loss by approximately 30% compared to 0.35mm—enabling 15–25% higher torque density for motor applications."
- Specify Lamination Thickness – Thinner laminations reduce core loss at high frequencies:
- 0.15mm: Ultimate high-RPM performance, FPV racing motors
- 0.20mm: Optimal balance—most UAV motor applications
- 0.35mm: Not recommended for high-performance UAV motors
- Verify Thermal & Structural Requirements – UAV motors demand:
- High stacking factor (≥ 97.5%) for maximum magnetic material
- Epoxy coating (30–60µm, Class H 180°C) for thermal durability
- Strong interlock or welding for structural integrity
- Precision concentricity (≤ ±0.01mm) for consistent air gap
- Choose a Specialist Matched Set Supplier – Evaluate UAV motor expertise:
- Experience with matched rotor and stator lamination sets for UAV motors
- Ultra-thin lamination capability (0.15–0.20mm)
- Large diameter capability (up to 200mm)
- Precision stamping: burr < 0.03mm, concentricity ±0.01mm
- Epoxy coating for motor thermal environments
- Material certificates and third-party test reports
- Proven track record with UAV motor manufacturers
- Engineering support for UAV motor optimization
FAQ: Motor Rotor & Stator Lamination Technical Questions
Motor rotor and stator laminations are the precision-stamped silicon steel components that form the two magnetic cores of a brushless DC motor. The stator is the stationary core with teeth that receive copper windings, generating the rotating magnetic field. The rotor is the rotating core that carries permanent magnets and follows the stator's field to produce torque. For UAV motors, matched rotor-stator sets ensure optimal air gap, minimize eddy current losses, and maximize torque density.
Matching rotor and stator laminations is critical because: (1) the air gap between rotor and stator must be consistent—precision in both components ensures this, (2) magnetic flux distribution depends on both components working together, (3) cogging torque is minimized when both are precision-stamped to the same tolerances, and (4) overall motor efficiency is maximized when the magnetic circuits are perfectly matched. Reenives provides matched rotor and stator sets designed to work together as a complete magnetic system.
For UAV motors, 0.15–0.20mm laminations are optimal. 0.20mm achieves core loss ≤ 8.5 W/kg at 400Hz—approximately 30% lower than conventional 0.35mm material. For FPV racing motors operating at extreme RPM, 0.15mm laminations provide ultimate performance. The same thickness should be used for both rotor and stator laminations to ensure matched magnetic performance.
12N14P (12-slot stator, 14-pole rotor) is the most common configuration for UAV motors, offering a near-perfect winding factor of 0.933 and exceptionally low cogging torque. It is widely used across FPV racing, logistics, agriculture, and eVTOL applications. 9N12P is also popular for FPV racing, while 24N22P is preferred for heavy-lift and logistics UAVs.
The air gap is the space between the rotor and stator magnetic surfaces. A perfectly concentric stator core ensures a consistent air gap around the rotor, leading to smooth torque delivery, reduced cogging, and higher efficiency—especially vital for high-RPM UAV motors. Precision stamping with concentricity tolerance of ±0.01mm is essential for maintaining consistent air gap and maximizing magnetic coupling.
Epoxy powder coating provides three critical functions for UAV motor rotor and stator laminations: (1) electrical insulation between laminations to minimize eddy currents and prevent interlaminar shorts, (2) thermal durability up to 180°C (Class H) to withstand the heat generated during high-power UAV motor operation, and (3) corrosion resistance for operation in outdoor and humid environments. The coating thickness (30–60µm) is optimized with dielectric strength exceeding 2.5 kV.
Yes. Reenives supports full customization of motor rotor and stator lamination sets including: stator outer diameter (12–200mm), rotor diameter (matched to stator), lamination thickness (0.15–0.20mm), slot/pole configurations (9N12P, 12N14P, 24N22P, 36N30P, custom), stacking height, material grade, and epoxy coating specifications. Private mould development is available for high-volume OEM projects with exclusive design rights.
Why Reenives – UAV Motor Rotor Stator Lamination Supplier
Reenives has earned its reputation as a specialist UAV Motor Rotor Stator Lamination Supplier by combining advanced manufacturing technology with deep expertise in matched magnetic circuit design for UAV propulsion.
Our Advantages — Rotor & Stator Set Specialists
- ✅ Matched Rotor-Stator Sets: Both components designed and stamped to work together for maximum efficiency
- ✅ Ultra-Thin Silicon Steel: 0.15–0.20mm laminations reduce core loss by up to 30%—extending UAV flight times by 8–12%
- ✅ Precision Progressive Stamping: Burr height < 0.03mm, concentricity ±0.01mm, stacking factor ≥ 97.5%
- ✅ UAV-Optimized Configurations: 9N12P, 12N14P, 24N22P, 36N30P—any UAV motor application
- ✅ Full Customization: Private mould development, tailored diameters, and custom stack heights
- ✅ Epoxy Coating: 30–60µm, Class H 180°C, dielectric > 2.5 kV
- ✅ Trusted Quality Control: IEC 60404-2 testing, third-party verification, and material certificates
- ✅ UAV Motor Expertise: 4 years of experience with 1,000+ enterprise clients—specializing in UAV propulsion
- ✅ Global Export Capability: Complete export qualifications with worldwide shipping to UAV manufacturers
- ✅ 100+ R&D Patents: Continuous innovation in rotor and stator lamination technology
🚁 Our motor rotor stator promise: Matched lamination sets that deliver longer flight times, higher torque, and cooler operation. Consistent quality that eliminates rework. Engineering support that optimizes your complete magnetic system. That's why Reenives is the trusted UAV motor rotor stator lamination supplier.
🚁 Ready to power your UAV motors with matched rotor and stator lamination sets?
Contact Reenives today for engineering consultation, OEM samples, and competitive global pricing.
📱 WhatsApp: +86-13377741885
Dongguan Runlu Motor Technology Co., Ltd.
Reenives — Professional Drone Stator Core Manufacturer
Founded in 2022, Reenives has rapidly grown into a trusted motor rotor stator lamination supplier for the worldwide UAV, FPV, eVTOL, and industrial motor markets.
Independent R&D Technology · Imported stamping & epoxy powder coating production lines · Dust-free workshops · 4 years of manufacturing experience · Solved motor rotor and stator challenges for 1,000+ enterprises worldwide—including leading UAV motor manufacturers.
From production to sales, we support bulk purchasing, private mould development, and sample making. We provide matched rotor and stator solutions for your specific UAV motor production scenarios—with competitive global pricing, consistent quality, and reliable on-time delivery.
🌐 www.reenives-bldcmotor.com | 📧 linda_reenives@163.com | 📱 +86-13377741885
✈️ Global UAV motor manufacturers welcome — consult, visit the factory, or request free samples today!
Reenives — UAV Motor Rotor Stator Lamination Supplier
© 2026 Dongguan Runlu Motor Technology Co., Ltd. All rights reserved.
Related Article
