3536 Outrunner BLDC Drone Motor Stator Lamination Supplier
3536 Outrunner – High-Torque Stator Laminations for BLDC Drone & RC Propulsion
3536 outrunner motor efficiency lagging? Need high-torque stator cores for fixed-wing UAV or multirotor applications? The 3536 outrunner motor is a versatile, high-torque powerplant popular in RC aircraft, fixed-wing UAVs, and multirotor platforms—delivering strong thrust for larger propellers with smooth, reliable operation. As a specialist 3536 outrunner BLDC drone motor stator lamination supplier, Reenives delivers precision 12N14P stator cores with 0.2mm ultra-thin silicon steel, burr height < 0.03mm, and epoxy coating—optimized for the 35mm x 36mm stator form factor, reducing core loss by up to 30%, and delivering reliable, efficient power for RC airplanes, fixed-wing UAVs, and multirotor applications .
- • What Is a 3536 Outrunner Motor?
- • Classification of 3536 Outrunner Stator Cores
- • Technical Specifications & Verified Data
- • Applications: RC Aircraft, Fixed-Wing UAVs, Multirotors & More
- • 6-Step Engineering Selection Guide for 3536 Outrunner Stators
- • FAQ: 3536 Outrunner Motor Technical Questions
- • Why Reenives – 3536 Outrunner BLDC Drone Motor Stator Lamination Supplier
- • Dongguan Runlu Motor Technology Co., Ltd.
What Is a 3536 Outrunner Motor?
A 3536 outrunner motor is a brushless DC motor designated with a 3536 stator size—35mm diameter and 36mm length (stator thickness). The outrunner configuration places the rotor on the outside, delivering high torque for direct-drive propellers . This form factor is widely used in RC aircraft, fixed-wing UAVs, and multirotor platforms due to its excellent power-to-weight ratio and versatility.
Understanding the 3536 outrunner designation:
- 35mm stator diameter – A robust, mid-size stator for high-power applications
- 36mm stator thickness – Provides strong torque output for larger propellers
- 12N14P configuration – The standard for 3536 outrunners, delivering a near-perfect winding factor of 0.933 and low cogging torque
- Typical applications – RC airplanes, fixed-wing UAVs, multirotors, 10–14 inch propellers
ⓘ 3536 outrunner insight: "The 3536 outrunner motor is a versatile, high-torque powerplant—ideal for RC aircraft, fixed-wing UAVs, and multirotor applications where reliability and thrust are essential."
Reenives manufactures precision stator cores for 3536 outrunner motors using imported 0.2mm silicon steel, progressive stamping dies, and automated epoxy powder coating—delivering optimal torque performance for RC aircraft, fixed-wing UAVs, and multirotor applications .
Classification of 3536 Outrunner Stator Cores
Reenives supplies 3536 outrunner stator cores across three primary series, tailored to different applications and performance requirements:
| Series | Stator Size (mm) | Common KV | Slot/Pole Configuration | Lamination Thickness | Best For |
|---|---|---|---|---|---|
| Series A – RC Aircraft | 35x36mm | 800–1000KV | 12N14P | 0.20mm | RC airplanes, fixed-wing, 10–12 inch props |
| Series B – Multirotor / UAV | 35x36mm | 1000–1450KV | 12N14P | 0.20mm | Multirotors, 10–12 inch props |
| Series C – Custom OEM | 35x36mm | Custom | Any configuration | 0.15–0.35mm | Specialized designs, proprietary motors |
The 12N14P configuration is the standard for 3536 outrunner motors, offering:
- Near-perfect winding factor (0.933) – Maximizing torque per amp
- Low cogging torque – Smooth throttle response and reliable operation
- High torque output – Optimized for larger propellers
Technical Specifications & Verified Data
All performance data below is derived from Reenives in-house laboratory testing (IEC 60404-2), third-party validation, and industry standards for 3536 outrunner stator cores.
| Parameter | Value / Range (Reenives Standard) | Test Standard / Source |
|---|---|---|
| Stator Outer Diameter | 35mm | CMM / optical comparator |
| Stator Height | 36mm | Micrometer |
| Configuration | 12N14P (12 slots, 14 poles) | Reenives design standards |
| Winding Factor | 0.933 (near-perfect for concentrated winding) | BLDC winding theory |
| Material Type | Silicon steel (CRNGO / Non-oriented) | Material certificates / IEC 60404 |
| Common Grades | 35PN210, 35PN250 (Nippon Steel / Baowu) | Material certificates |
| Lamination Thickness | 0.20mm (standard), 0.15mm (premium) | Micrometer / IEC 60404-2 |
| Core Loss @ 1.0T, 400Hz (0.20mm) | ≤ 8.5 W/kg — 30% lower than 0.35mm | IEC 60404-2 / Reenives R&D |
| Saturation Flux Density Bs | 1.68 – 1.72 T | Epstein frame test |
| Burr Height (max) | < 0.03mm | Optical measurement |
| Epoxy Coating Thickness | 30–60 µm, dielectric > 2.5 kV | ASTM D149 |
| Stacking Factor | ≥ 97.5% | Weight method |
| Concentricity Tolerance | ±0.01mm – ±0.015mm | CMM measurement |
| Typical Motor Efficiency | 87–92% (with optimized 3536 stator) | IEEE Xplore / FEM simulation |
🔬 Data Source: Reenives R&D Report 2024-Q4 + IEC 60404-2 standard + Material certificates + Industry benchmarks .
Applications: RC Aircraft, Fixed-Wing UAVs, Multirotors & More
3536 outrunner stator cores power a wide range of applications:
| Application | Typical Propeller | Battery | Performance Priorities |
|---|---|---|---|
| RC Aircraft / Fixed-Wing | 10–12 inch | 3S–4S | Thrust, efficiency, reliability |
| Multirotors / UAVs | 10–12 inch | 3S–4S | Balanced performance, efficiency |
| FPV Racing Drones | 8–10 inch | 4S–6S | Responsive control, high thrust |
| Scale / Vintage RC | 10–12 inch | 3S–4S | Smooth scale performance, reliability |
| Heavy-Lift UAVs | 12–14 inch | 4S–6S | High thrust, payload capacity |
"The 3536 outrunner motor is a versatile, high-torque powerplant—ideal for RC aircraft, fixed-wing UAVs, and multirotor applications where reliability and thrust are essential."
6-Step Engineering Selection Guide for 3536 Outrunner Stators
For procurement engineers and motor designers, selecting the optimal 3536 outrunner stator core requires systematic evaluation. Here is a practical 6-step framework:
- Define Application & Performance Requirements – Identify your motor's intended use:
- RC aircraft / fixed-wing: Thrust-focused, 10–12 inch props
- Multirotor: Balanced performance, 10–12 inch props
- FPV racing: High RPM, responsive control
- Select KV Rating – Match to battery and propeller:
- 800–1000KV: High torque, larger props (10–12 inch)
- 1000–1250KV: Balanced performance
- 1250–1500KV: Higher RPM, smaller props
- Choose Lamination Thickness – Thinner laminations reduce core loss:
- 0.20mm: Optimal balance—most 3536 applications
- 0.15mm: Premium efficiency, extended flight times
- 0.35mm: Not recommended for high-performance 3536 outrunners
ⓘ "0.20mm laminations reduce core loss by approximately 30% compared to 0.35mm—critical for 3536 outrunner efficiency ."
- Confirm 12N14P Configuration – This is the standard for 3536 outrunners:
- 12 slots (stator teeth) with concentrated windings
- 14 poles (rotor magnets) for optimal magnetic alignment
- Winding factor 0.933 for maximum torque per amp
- Specify Insulation & Coating – Critical for motor reliability:
- Epoxy powder coating (30–60µm, Class H 180°C)
- Corrosion resistance for outdoor RC and UAV environments
- Dielectric strength > 2.5 kV for reliable insulation
- Choose a Specialist 3536 Stator Supplier – Evaluate outrunner motor expertise:
- Experience with 3536 outrunner stator design for RC/UAV applications
- Ultra-thin lamination capability (0.15–0.20mm)
- Precision stamping: burr < 0.03mm, concentricity ±0.01mm
- Epoxy coating capability for outrunner motor environments
- Material certificates and third-party test reports
- Proven track record with 3536 motor manufacturers
- Engineering support for 3536 outrunner optimization
FAQ: 3536 Outrunner Motor Technical Questions
A 3536 outrunner motor has a stator diameter of 35mm and a stator thickness of 36mm . The outrunner configuration places the rotor on the outside, delivering high torque for direct-drive propellers. This form factor is popular in RC aircraft, fixed-wing UAVs, and multirotor applications . Most 3536 outrunners use a 12N14P configuration (12 slots, 14 poles) for smooth, efficient operation .
For 3536 outrunner motors, the optimal stator lamination features: 0.20mm (or 0.15mm for premium) silicon steel , 12N14P slot/pole configuration , burr height < 0.03mm, epoxy coating (30–60µm, Class H 180°C) , and stacking factor ≥ 97.5%. The 12N14P configuration delivers a near-perfect winding factor of 0.933 and low cogging torque—ideal for 3536 outrunner performance .
The optimal KV rating for a 3536 outrunner motor depends on the application and propeller: (1) 800–1000KV – high torque for 10–12 inch props on 3S–4S batteries , (2) 1000–1250KV – balanced performance for 10–11 inch props , (3) 1250–1500KV – higher RPM for 8–10 inch props on 3S–4S batteries . Always check the motor's specified maximum current and propeller recommendations.
Epoxy powder coating provides three critical functions for 3536 outrunner stators: (1) electrical insulation between laminations to minimize eddy currents and prevent interlaminar shorts, (2) thermal durability up to 180°C (Class H) to withstand the heat generated during sustained high-thrust operation , and (3) corrosion resistance for operation in outdoor RC and UAV environments. The coating thickness (30–60µm) is optimized with dielectric strength exceeding 2.5 kV .
3536 outrunner motors typically operate on 2S–6S LiPo batteries, depending on the KV rating and application: (1) 3S–4S LiPo – balanced performance for RC aircraft and multirotors , (2) 4S–6S LiPo – higher power for heavy-lift and FPV racing applications . Propeller sizes typically range from 8–14 inches, with 10–12 inches being most common for general applications .
Yes. Reenives supports full customization of 3536 outrunner stator cores including: stator size (35x36mm standard), lamination thickness (0.15–0.20mm) , 12N14P configuration , stacking height, material grade (35PN210, 35PN250), and epoxy coating specifications . Private mould development is available for high-volume OEM projects with exclusive design rights.
Why Reenives – 3536 Outrunner BLDC Drone Motor Stator Lamination Supplier
Reenives has earned its reputation as a specialist 3536 Outrunner BLDC Drone Motor Stator Lamination Supplier by combining advanced manufacturing technology with deep expertise in this versatile motor platform.
Our Advantages — 3536 Outrunner Stator Specialists
- ✅ 3536 Form Factor Expertise: 35x36mm stator—proven and versatile for RC aircraft, fixed-wing UAVs, and multirotors
- ✅ Ultra-Thin Silicon Steel: 0.15–0.20mm laminations reduce core loss by up to 30%—critical for 3536 outrunner efficiency
- ✅ Precision Progressive Stamping: Burr height < 0.03mm, concentricity ±0.01mm, stacking factor ≥ 97.5%
- ✅ 12N14P Expertise: Near-perfect winding factor 0.933, low cogging torque, smooth operation
- ✅ Wide KV Range Compatibility: 800–1500KV—from high-torque to high-RPM applications
- ✅ Full Customization: Private mould development, tailored stack heights, and custom specifications
- ✅ Epoxy Coating: 30–60µm, Class H 180°C, dielectric > 2.5 kV
- ✅ Trusted Quality Control: IEC 60404-2 testing, third-party verification, and material certificates
- ✅ Global Export Capability: Complete export qualifications with worldwide shipping to RC and UAV manufacturers
- ✅ Proven Track Record: 4 years experience, 1,000+ enterprise clients, 100+ R&D patents
🚁 Our 3536 outrunner promise: Stator cores that deliver proven, reliable high-torque performance for 3536 outrunner motors. Consistent quality that eliminates rework. Engineering support that optimizes your motor design. That's why Reenives is the trusted 3536 outrunner BLDC drone motor stator lamination supplier.
🚁 Ready to power your 3536 outrunner motors with precision stator cores?
Contact Reenives today for engineering consultation, OEM samples, and competitive global pricing.
📱 WhatsApp: +86-13377741885
Dongguan Runlu Motor Technology Co., Ltd.
Reenives — Professional Drone Stator Core Manufacturer
Founded in 2022, Reenives has rapidly grown into a trusted 3536 outrunner stator lamination supplier for the worldwide RC, UAV, and industrial motor markets.
Independent R&D Technology · Imported stamping & epoxy powder coating production lines · Dust-free workshops · 4 years of manufacturing experience · Solved 3536 outrunner stator challenges for 1,000+ enterprises worldwide—including leading RC aircraft and UAV manufacturers.
From production to sales, we support bulk purchasing, private mould development, and sample making. We provide tailor-made solutions for your specific 3536 outrunner motor production scenarios—with competitive global pricing, consistent quality, and reliable on-time delivery.
🌐 www.reenives-bldcmotor.com | 📧 linda_reenives@163.com | 📱 +86-13377741885
✈️ Global RC and UAV manufacturers welcome — consult, visit the factory, or request free samples today!
Reenives — 3536 Outrunner BLDC Drone Motor Stator Lamination Supplier
© 2026 Dongguan Runlu Motor Technology Co., Ltd. All rights reserved.
3542 Brushless Outrunner 1000kv Drone UAV Motor Stator Core Supplier
2212 10 Brushless Outrunner 1400kv Drone Motor Stator Core Supplier
Related Article
