2212 10 Brushless Outrunner 1400kv Drone Motor Stator Core Supplier
2212 10 Brushless Outrunner 1400kv – Balanced Stator Cores for RC & UAV Propulsion
Need a balanced, versatile outrunner for your RC aircraft or multirotor? 1400kv motor efficiency lagging? The 2212 10 brushless outrunner 1400kv motor is one of the most popular and versatile powerplants in the RC and UAV world—delivering an ideal balance of speed, torque, and efficiency for 8–10 inch propellers. As a specialist 2212 10 brushless outrunner 1400kv drone motor stator core supplier, Reenives delivers precision 12N14P stator cores with 0.2mm ultra-thin silicon steel, burr height < 0.03mm, and epoxy coating—optimized for 1400KV balanced performance, reducing core loss by up to 30%, and delivering reliable, efficient power for RC airplanes, multirotor platforms, and mid-sized UAVs.
- • What Is a 2212 10 Brushless Outrunner 1400kv Motor?
- • Classification of 2212 1400kv Outrunner Stator Cores
- • Technical Specifications & Verified Data
- • Applications: RC Aircraft, Multirotors, UAVs & More
- • 6-Step Engineering Selection Guide for 2212 1400kv Outrunner Stators
- • FAQ: 2212 1400kv Outrunner Motor Technical Questions
- • Why Reenives – 2212 10 Brushless Outrunner 1400kv Drone Motor Stator Core Supplier
- • Dongguan Runlu Motor Technology Co., Ltd.
What Is a 2212 10 Brushless Outrunner 1400kv Motor?
A 2212 10 brushless outrunner 1400kv motor is a brushless DC motor designated with a 2212 stator size (22mm diameter x 12mm height) and a KV rating of 1400 RPM per volt. The "10" in the name typically refers to the number of turns in the winding, though in common usage, "2212 10" is often used interchangeably with "2212". This combination delivers an ideal balance of speed and torque, making it one of the most popular motors for RC aircraft and multirotor applications.
Understanding the 2212 1400kv designation:
- 2212 stator size – 22mm diameter x 12mm height, a classic and widely-used form factor
- 1400KV rating – 1400 RPM per volt; on 3S (11.1V), spins at approximately 15,540 RPM unloaded
- Outrunner configuration – Rotor on the outside, delivering high torque for direct-drive propellers
- Typical applications – RC airplanes, multirotors, small UAVs, 8–10 inch propellers
ⓘ 2212 1400kv insight: "The 2212 1400kv outrunner motor is one of the most popular and proven motor designs in RC and UAV—delivering the perfect balance of speed, torque, and efficiency for a wide range of applications."
Reenives manufactures precision stator cores for 2212 1400kv outrunner motors using imported 0.2mm silicon steel, progressive stamping dies, and automated epoxy powder coating—delivering optimal balanced performance for RC aircraft, multirotor, and UAV applications.
Classification of 2212 1400kv Outrunner Stator Cores
Reenives supplies 2212 1400kv outrunner stator cores across three primary series:
| Series | Stator Size (mm) | Common Motor | Slot/Pole Configuration | Lamination Thickness | Best For |
|---|---|---|---|---|---|
| Series A – RC Aircraft | 22x12mm | 2212/10 | 12N14P | 0.20mm | RC airplanes, 8–10 inch props |
| Series B – Multirotor / UAV | 22x12mm | 2212/10 | 12N14P | 0.20mm | Multirotors, 8–10 inch props |
| Series C – Custom OEM | 22x12mm | Any | Any configuration | 0.15–0.35mm | Specialized designs, proprietary motors |
The 12N14P configuration is the standard for 2212 1400kv outrunner motors, offering:
- Near-perfect winding factor (0.933) – Maximizing efficiency
- Low cogging torque – Smooth throttle response
- Balanced performance – Ideal combination of speed and torque
Technical Specifications & Verified Data
All performance data below is derived from Reenives in-house laboratory testing (IEC 60404-2), third-party validation, and industry standards for 2212 1400kv outrunner stator cores.
| Parameter | Value / Range (Reenives Standard) | Test Standard / Source |
|---|---|---|
| KV Rating Compatibility | 1400KV (balanced performance) | Industry standard |
| Configuration | 12N14P (12 slots, 14 poles) | Reenives design standards |
| Stator Outer Diameter | 22mm | CMM / optical comparator |
| Stator Height | 12mm | Micrometer |
| Winding Factor | 0.933 (near-perfect for concentrated winding) | BLDC winding theory |
| Material Type | Silicon steel (CRNGO / Non-oriented) | Material certificates / IEC 60404 |
| Common Grades | 35PN210, 35PN250 (Nippon Steel / Baowu) | Material certificates |
| Lamination Thickness | 0.20mm (standard), 0.15mm (premium) | Micrometer / IEC 60404-2 |
| Core Loss @ 1.0T, 400Hz (0.20mm) | ≤ 8.5 W/kg — 30% lower than 0.35mm | IEC 60404-2 / Reenives R&D |
| Saturation Flux Density Bs | 1.68 – 1.72 T | Epstein frame test |
| Burr Height (max) | < 0.03mm | Optical measurement |
| Epoxy Coating Thickness | 30–60 µm, dielectric > 2.5 kV | ASTM D149 |
| Stacking Factor | ≥ 97.5% | Weight method |
| Concentricity Tolerance | ±0.01mm – ±0.015mm | CMM measurement |
| Typical Motor Efficiency | 88–92% (with optimized 1400KV stator) | IEEE Xplore / FEM simulation |
🔬 Data Source: Reenives R&D Report 2024-Q4 + IEC 60404-2 standard + Material certificates + Industry benchmarks.
Applications: RC Aircraft, Multirotors, UAVs & More
2212 1400kv outrunner stator cores power a wide range of applications:
| Application | Typical Propeller | Battery | Performance Priorities |
|---|---|---|---|
| RC Airplanes (Sport/Trainer) | 8–10 inch | 2S–3S | Balanced speed, thrust, efficiency |
| Multirotors / Quadcopters | 8–10 inch | 3S–4S | Balanced performance, efficiency |
| FPV Drones | 8 inch | 3S–4S | Responsive control, efficiency |
| Fixed-Wing UAVs | 8–10 inch | 3S–4S | Efficiency, endurance, reliability |
| Scale / Vintage RC | 8–10 inch | 2S–3S | Smooth scale performance, reliability |
"The 2212 1400kv outrunner motor is one of the most popular and proven motor designs in RC and UAV—delivering the perfect balance of speed, torque, and efficiency for a wide range of applications."
6-Step Engineering Selection Guide for 2212 1400kv Outrunner Stators
For procurement engineers and motor designers, selecting the optimal 2212 1400kv outrunner stator core requires systematic evaluation. Here is a practical 6-step framework:
- Define Application & Performance Requirements – Identify your motor's intended use:
- RC aircraft: Balanced speed and thrust—1400KV, 8–10 inch props
- Multirotor: Balanced performance—1400KV, 8–10 inch props
- FPV drone: Responsive control—1400KV, 8 inch props
- Confirm 22x12mm Stator Size – The classic 2212 form factor:
- 22mm diameter – Standard 2212 size
- 12mm height – Balanced power output
- Choose Lamination Thickness – Thinner laminations reduce core loss:
- 0.20mm: Optimal balance—most 1400KV applications
- 0.15mm: Premium efficiency, extended flight times
- 0.35mm: Not recommended for high-performance 1400KV outrunners
ⓘ "0.20mm laminations reduce core loss by approximately 30% compared to 0.35mm—critical for 1400KV motor efficiency and extended flight times."
- Confirm 12N14P Configuration – This is the standard for 2212 1400KV outrunners:
- 12 slots (stator teeth) with concentrated windings
- 14 poles (rotor magnets) for optimal magnetic alignment
- Winding factor 0.933 for maximum efficiency
- Specify Insulation & Coating – Critical for motor reliability:
- Epoxy powder coating (30–60µm, Class H 180°C)
- Corrosion resistance for outdoor RC and UAV environments
- Dielectric strength > 2.5 kV for reliable insulation
- Choose a Specialist 1400KV Stator Supplier – Evaluate outrunner motor expertise:
- Experience with 2212 1400KV outrunner stator design for RC/UAV applications
- Ultra-thin lamination capability (0.15–0.20mm)
- Precision stamping: burr < 0.03mm, concentricity ±0.01mm
- Epoxy coating capability for outrunner motor environments
- Material certificates and third-party test reports
- Proven track record with 2212 motor manufacturers
- Engineering support for 2212 1400KV outrunner optimization
FAQ: 2212 1400kv Outrunner Motor Technical Questions
1400KV means the motor spins at 1400 RPM per volt applied with no load. On a 3S LiPo battery (11.1V), a 1400KV motor theoretically spins at approximately 15,540 RPM unloaded. The 2212 1400KV combination delivers an ideal balance of speed and torque—making it one of the most popular and versatile motors for RC aircraft, multirotors, and UAVs with 8–10 inch propellers.
For 2212 1400kv outrunner motors, the optimal stator lamination features: 0.20mm (or 0.15mm for premium) silicon steel, 12N14P slot/pole configuration, burr height < 0.03mm, epoxy coating (30–60µm, Class H 180°C), and stacking factor ≥ 97.5%. The 12N14P configuration delivers a near-perfect winding factor of 0.933 and low cogging torque—ideal for 1400KV balanced performance. Most high-quality 2212 1400KV motors use ultra-thin 0.2mm stator laminations.
2212 1400kv outrunner motors typically use 8–10 inch propellers, depending on the battery and application: (1) 8-inch prop – higher RPM, good for multirotors, (2) 9-inch prop – balanced performance for RC aircraft and multirotors, (3) 10-inch prop – maximum thrust, ideal for glider and scale applications. Always check the motor's specified maximum current and propeller recommendations before operation.
2212 1400kv outrunner motors typically operate on 2S–4S LiPo batteries, depending on the application: (1) 3S LiPo – balanced performance for general RC aircraft and multirotors, (2) 4S LiPo – higher power for performance applications, (3) 2S LiPo – lower power for lighter aircraft or scale applications. Always check the motor's specified voltage range before selecting a battery.
Epoxy powder coating provides three critical functions for 2212 1400kv outrunner stators: (1) electrical insulation between laminations to minimize eddy currents and prevent interlaminar shorts, (2) thermal durability up to 180°C (Class H) to withstand the heat generated during sustained operation, and (3) corrosion resistance for operation in outdoor RC and UAV environments. The coating thickness (30–60µm) is optimized with dielectric strength exceeding 2.5 kV.
Yes. Reenives supports full customization of 2212 1400kv outrunner stator cores including: stator height (12mm standard), lamination thickness (0.15–0.20mm), 12N14P configuration, stacking height, material grade (35PN210, 35PN250), and epoxy coating specifications. Private mould development is available for high-volume OEM projects with exclusive design rights—from RC aircraft outrunners to custom multirotor motors.
Why Reenives – 2212 10 Brushless Outrunner 1400kv Drone Motor Stator Core Supplier
Reenives has earned its reputation as a specialist 2212 10 Brushless Outrunner 1400kv Drone Motor Stator Core Supplier by combining advanced manufacturing technology with deep expertise in this proven motor platform.
Our Advantages — 2212 1400KV Outrunner Stator Specialists
- ✅ 2212 1400KV Expertise: Proven 22x12mm design, 12N14P configuration—ideal balanced performance
- ✅ Ultra-Thin Silicon Steel: 0.15–0.20mm laminations reduce core loss by up to 30%—critical for 1400KV efficiency
- ✅ Precision Progressive Stamping: Burr height < 0.03mm, concentricity ±0.01mm, stacking factor ≥ 97.5%
- ✅ 12N14P Expertise: Near-perfect winding factor 0.933, low cogging torque, smooth operation
- ✅ Classic 2212 Form Factor: 22x12mm stator—one of the most popular motor sizes in RC and UAV
- ✅ Full Customization: Private mould development, tailored stack heights, and custom specifications
- ✅ Epoxy Coating: 30–60µm, Class H 180°C, dielectric > 2.5 kV
- ✅ Trusted Quality Control: IEC 60404-2 testing, third-party verification, and material certificates
- ✅ Global Export Capability: Complete export qualifications with worldwide shipping to RC and UAV manufacturers
- ✅ Proven Track Record: 4 years experience, 1,000+ enterprise clients, 100+ R&D patents
🚁 Our 2212 1400KV promise: Stator cores that deliver the proven balance of speed, torque, and efficiency for 2212 1400kv outrunner motors. Consistent quality that eliminates rework. Engineering support that optimizes your motor design. That's why Reenives is the trusted 2212 10 brushless outrunner 1400kv drone motor stator core supplier.
🚁 Ready to power your 2212 1400kv outrunner motors with precision stator cores?
Contact Reenives today for engineering consultation, OEM samples, and competitive global pricing.
📱 WhatsApp: +86-13377741885
Dongguan Runlu Motor Technology Co., Ltd.
Reenives — Professional Drone Stator Core Manufacturer
Founded in 2022, Reenives has rapidly grown into a trusted 2212 1400kv outrunner stator core supplier for the worldwide RC, UAV, and industrial motor markets.
Independent R&D Technology · Imported stamping & epoxy powder coating production lines · Dust-free workshops · 4 years of manufacturing experience · Solved 2212 1400KV outrunner stator challenges for 1,000+ enterprises worldwide—including leading RC aircraft and UAV manufacturers.
From production to sales, we support bulk purchasing, private mould development, and sample making. We provide tailor-made solutions for your specific 2212 1400KV outrunner motor production scenarios—with competitive global pricing, consistent quality, and reliable on-time delivery.
🌐 www.reenives-bldcmotor.com | 📧 linda_reenives@163.com | 📱 +86-13377741885
✈️ Global RC and UAV manufacturers welcome — consult, visit the factory, or request free samples today!
Reenives — 2212 10 Brushless Outrunner 1400kv Drone Motor Stator Core Supplier
© 2026 Dongguan Runlu Motor Technology Co., Ltd. All rights reserved.
3536 Outrunner BLDC Drone Motor Stator Lamination Supplier
370 Brushless Outrunner 1300kv Drone Motor Stator Lamination Supplier
Related Article
