2200KV Outrunner Brushless Motor Stator Core Supplier
2200KV Outrunner Brushless Motor – High-RPM Stator Cores for FPV & UAV Propulsion
Need high-speed outrunner performance for your FPV drone? 2200KV motor efficiency lagging? The 2200KV outrunner brushless motor is a popular high-RPM choice for FPV racing, RC aircraft, and UAV applications—delivering speed and agility with the right stator core design. As a specialist 2200KV outrunner brushless motor stator core supplier, Reenives delivers precision 12N14P stator cores with 0.2mm ultra-thin silicon steel, burr height < 0.03mm, and epoxy coating—optimized for high-RPM 2200KV operation , reducing core loss by up to 30%, and maximizing power-to-weight ratio for dynamic flight applications.
- • What Is a 2200KV Outrunner Brushless Motor?
- • Classification of 2200KV Outrunner Stator Cores
- • Technical Specifications & Verified Data
- • Applications: FPV Racing, RC Aircraft, UAVs & More
- • 6-Step Engineering Selection Guide for 2200KV Outrunner Stators
- • FAQ: 2200KV Outrunner Motor Technical Questions
- • Why Reenives – 2200KV Outrunner Brushless Motor Stator Core Supplier
- • Dongguan Runlu Motor Technology Co., Ltd.
What Is a 2200KV Outrunner Brushless Motor?
A 2200KV outrunner brushless motor is a brushless DC motor with a KV rating of 2200 RPM per volt—meaning it spins at 2200 RPM for every volt applied with no load . The outrunner configuration places the rotor on the outside, providing high torque at low RPM—ideal for direct-drive propeller applications in FPV drones and RC aircraft.
Understanding the 2200KV designation:
- KV rating – 2200 RPM per volt; a 2200KV motor on 3S (11.1V) spins at approximately 24,420 RPM unloaded
- Outrunner configuration – Rotor spins on the outside, delivering high torque for direct-drive propellers
- Common stator sizes – A2212 (22x12mm), 2836 (28x36mm), 2207/2306 FPV sizes
- Typical applications – FPV racing, freestyle drones, RC airplanes, and multirotors
ⓘ 2200KV insight: "The 2200KV outrunner motor is a versatile high-RPM workhorse—offering the speed for FPV racing and the torque for larger props on 3S–4S setups."
Reenives manufactures precision stator cores for 2200KV outrunner motors using imported 0.2mm silicon steel, progressive stamping dies, and automated epoxy powder coating—delivering optimal high-RPM performance for FPV racing, RC aircraft, and UAV applications.
Classification of 2200KV Outrunner Stator Cores
Reenives supplies 2200KV outrunner stator cores across three primary series, tailored to different motor form factors and applications:
| Series | Stator Size (mm) | Common Motor Model | Slot/Pole Configuration | Lamination Thickness | Best For |
|---|---|---|---|---|---|
| Series A – FPV Racing | 22x7–22x12mm | 2207, 2306, 2212 | 12N14P | 0.15–0.20mm | FPV racing, 5-inch drones, high RPM |
| Series B – RC Aircraft / Multirotor | 28x36mm | 2836, 28-36 | 12N14P | 0.20mm | RC planes, larger multirotors, 3S–4S |
| Series C – Custom OEM | Custom | Any | Any configuration | 0.15–0.35mm | Specialized designs, proprietary motors |
The 12N14P configuration is the dominant choice for 2200KV outrunner motors , offering:
- Near-perfect winding factor (0.933) – Maximizing torque per amp
- Low cogging torque – Smooth throttle response for FPV pilots
- High RPM capability – Optimized for 2200KV high-speed operation
Technical Specifications & Verified Data
All performance data below is derived from Reenives in-house laboratory testing (IEC 60404-2), third-party validation, and industry standards for 2200KV outrunner stator cores.
| Parameter | Value / Range (Reenives Standard) | Test Standard / Source |
|---|---|---|
| KV Rating Compatibility | 2200KV (high-RPM optimized) | Industry standard |
| Configuration | 12N14P (12 slots, 14 poles) | Reenives design standards |
| Stator Outer Diameter | 22–36mm (customizable) | CMM / optical comparator |
| Winding Factor | 0.933 (near-perfect for concentrated winding) | BLDC winding theory |
| Material Type | Silicon steel (CRNGO / Non-oriented) | Material certificates / IEC 60404 |
| Common Grades | 35PN210, 35PN250, 20WTG1300 (Nippon Steel / Baowu) | Material certificates |
| Lamination Thickness | 0.15mm / 0.20mm (customizable) | Micrometer / IEC 60404-2 |
| Core Loss @ 1.0T, 400Hz (0.20mm) | ≤ 8.5 W/kg — 30% lower than 0.35mm | IEC 60404-2 / Reenives R&D |
| Saturation Flux Density Bs | 1.68 – 1.72 T | Epstein frame test |
| Burr Height (max) | < 0.03mm | Optical measurement |
| Epoxy Coating Thickness | 30–60 µm, dielectric > 2.5 kV | ASTM D149 |
| Stacking Factor | ≥ 97.5% | Weight method |
| Concentricity Tolerance | ±0.01mm – ±0.015mm | CMM measurement |
| Typical Motor Efficiency | 88–92% (with optimized 2200KV stator) | IEEE Xplore / FEM simulation |
🔬 Data Source: Reenives R&D Report 2024-Q4 + IEC 60404-2 standard + Material certificates + Industry benchmarks.
Applications: FPV Racing, RC Aircraft, UAVs & More
2200KV outrunner stator cores power a wide range of applications:
| Application | Typical Stator Size | Battery | Performance Priorities |
|---|---|---|---|
| FPV Racing Drones | 2207, 2306 | 3S–4S | High RPM, rapid acceleration, agility |
| 5-inch Freestyle Drones | 2207, 2306 | 3S–4S | Smooth control, consistent power, responsiveness |
| RC Airplanes / Sport Planes | 2212, 2836 | 2S–3S | Speed, thrust, reliability |
| Multirotors / Quadcopters | 2212, 28-36 | 2S–4S | Balanced performance, efficiency |
| Micro UAVs | 22x7mm | 3S–4S | Lightweight, efficiency, agility |
"The 2200KV outrunner motor is one of the most versatile powerplants in RC and UAV—from FPV racing to sport flying, its balanced performance makes it a top choice."
6-Step Engineering Selection Guide for 2200KV Outrunner Stators
For procurement engineers and motor designers, selecting the optimal 2200KV outrunner stator core requires systematic evaluation. Here is a practical 6-step framework:
- Define Application & Performance Requirements – Identify your motor's intended use:
- FPV racing: High RPM, rapid acceleration—2207/2306 stators, 3S–4S
- RC aircraft: Speed, thrust—2212/2836 stators, 2S–3S
- General multirotor: Balanced performance—A2212, 2S–3S
- Select Stator Size – Match motor form factor to application:
- 22x7mm: FPV racing (2207)
- 22x12mm: Classic A2212 multirotor/aircraft
- 28x36mm: Larger RC aircraft, higher power
- Choose Lamination Thickness – Thinner laminations reduce core loss at high RPM:
- 0.15mm: Ultimate high-RPM performance, FPV racing
- 0.20mm: Optimal balance—most 2200KV applications
- 0.35mm: Not recommended for high-performance 2200KV outrunners
ⓘ "0.20mm laminations reduce core loss by approximately 30% compared to 0.35mm—critical for 2200KV motor efficiency at high RPM."
- Confirm 12N14P Configuration – This is the standard for 2200KV outrunners :
- 12 slots (stator teeth) with concentrated windings
- 14 poles (rotor magnets) for optimal magnetic alignment
- Winding factor 0.933 for maximum torque per amp
- Specify Insulation & Coating – Critical for motor reliability:
- Epoxy powder coating (30–60µm, Class H 180°C)
- Corrosion resistance for outdoor and FPV environments
- Dielectric strength > 2.5 kV for reliable insulation
- Choose a Specialist 2200KV Stator Supplier – Evaluate outrunner motor expertise:
- Experience with 2200KV outrunner stator design for FPV/RC applications
- Ultra-thin lamination capability (0.15–0.20mm)
- Precision stamping: burr < 0.03mm, concentricity ±0.01mm
- Epoxy coating capability for outrunner motor environments
- Material certificates and third-party test reports
- Proven track record with 2200KV motor manufacturers
- Engineering support for 2200KV outrunner optimization
FAQ: 2200KV Outrunner Motor Technical Questions
2200KV means the motor spins at 2200 RPM per volt applied with no load . For example, on a 3S LiPo battery (11.1V), a 2200KV motor theoretically spins at approximately 24,420 RPM unloaded. Higher KV motors deliver higher speed but lower torque, while lower KV motors provide more torque at lower speeds. The 2200KV rating is a popular choice for FPV racing and RC aircraft because it balances speed and efficiency .
For 2200KV outrunner motors, the optimal stator lamination features: 0.20mm (or 0.15mm for racing) silicon steel, 12N14P slot/pole configuration, burr height < 0.03mm, epoxy coating (30–60µm, Class H 180°C), and stacking factor ≥ 97.5% . The 12N14P configuration delivers a near-perfect winding factor of 0.933 and low cogging torque—ideal for 2200KV high-RPM operation. Many high-quality 2200KV outrunner motors use ultra-thin 0.2mm stator laminations for maximum efficiency .
2200KV outrunner motors typically operate on 2S–4S LiPo batteries, depending on the motor size and application . Common setups include: (1) 3S LiPo – balanced performance for general FPV and RC aircraft , (2) 4S LiPo – higher power and RPM for aggressive FPV racing and high-performance setups , and (3) 2S LiPo – lower power for lighter aircraft or micro applications . Always check the motor's specified voltage range before selecting a battery.
A2212 2200KV motors have a 22x12mm stator, while 2207 2200KV motors have a 22x7mm stator. The A2212 (12mm height) provides more torque and power output due to the larger stator volume—typically used in larger multirotors and RC aircraft . The 2207 (7mm height) is lighter and more responsive—popular for 5-inch FPV racing drones . The 12N14P configuration is used in both, but the taller stator delivers higher torque, while the shorter stator offers faster RPM response for racing applications.
Epoxy powder coating provides three critical functions for 2200KV outrunner stators: (1) electrical insulation between laminations to minimize eddy currents and prevent interlaminar shorts—critical at high RPM, (2) thermal durability up to 180°C (Class H) to withstand the heat generated during high-power operation, and (3) corrosion resistance for operation in outdoor and FPV environments. The coating thickness (30–60µm) is optimized with dielectric strength exceeding 2.5 kV .
Yes. Reenives supports full customization of 2200KV outrunner stator cores including: stator size (22x7mm, 22x12mm, 28x36mm, custom), lamination thickness (0.15–0.20mm), 12N14P configuration, stacking height, material grade (35PN210, 35PN250, 20WTG1300), and epoxy coating specifications. Private mould development is available for high-volume OEM projects with exclusive design rights—from FPV racing outrunners to high-power RC aircraft motors.
Why Reenives – 2200KV Outrunner Brushless Motor Stator Core Supplier
Reenives has earned its reputation as a specialist 2200KV Outrunner Brushless Motor Stator Core Supplier by combining advanced manufacturing technology with deep expertise in high-RPM outrunner motor design.
Our Advantages — 2200KV Outrunner Stator Specialists
- ✅ High-RPM Optimized Designs: Stator cores engineered for 2200KV operation—maximizing speed and efficiency
- ✅ Ultra-Thin Silicon Steel: 0.15–0.20mm laminations reduce core loss by up to 30%—critical for 2200KV performance
- ✅ Precision Progressive Stamping: Burr height < 0.03mm, concentricity ±0.01mm, stacking factor ≥ 97.5%
- ✅ 12N14P Expertise: Near-perfect winding factor 0.933, low cogging torque, smooth high-RPM operation
- ✅ Wide Size Range: 22x7mm (FPV racing) to 28x36mm (RC aircraft)—custom sizes available
- ✅ Full Customization: Private mould development, tailored stack heights, and custom specifications
- ✅ Epoxy Coating: 30–60µm, Class H 180°C, dielectric > 2.5 kV
- ✅ Trusted Quality Control: IEC 60404-2 testing, third-party verification, and material certificates
- ✅ Global Export Capability: Complete export qualifications with worldwide shipping to FPV and RC manufacturers
- ✅ Proven Track Record: 4 years experience, 1,000+ enterprise clients, 100+ R&D patents
🚁 Our 2200KV promise: Stator cores that deliver maximum speed and efficiency for 2200KV outrunner motors. Consistent quality that eliminates rework. Engineering support that optimizes your high-RPM motor design. That's why Reenives is the trusted 2200KV outrunner brushless motor stator core supplier.
🚁 Ready to power your 2200KV outrunner motors with precision stator cores?
Contact Reenives today for engineering consultation, OEM samples, and competitive global pricing.
📱 WhatsApp: +86-13377741885
Dongguan Runlu Motor Technology Co., Ltd.
Reenives — Professional Drone Stator Core Manufacturer
Founded in 2022, Reenives has rapidly grown into a trusted 2200KV outrunner stator core supplier for the worldwide FPV, RC, UAV, and industrial motor markets.
Independent R&D Technology · Imported stamping & epoxy powder coating production lines · Dust-free workshops · 4 years of manufacturing experience · Solved 2200KV outrunner stator challenges for 1,000+ enterprises worldwide—including leading FPV racing and RC manufacturers.
From production to sales, we support bulk purchasing, private mould development, and sample making. We provide tailor-made solutions for your specific 2200KV outrunner motor production scenarios—with competitive global pricing, consistent quality, and reliable on-time delivery.
🌐 www.reenives-bldcmotor.com | 📧 linda_reenives@163.com | 📱 +86-13377741885
✈️ Global FPV and RC manufacturers welcome — consult, visit the factory, or request free samples today!
Reenives — 2200KV Outrunner Brushless Motor Stator Core Supplier
© 2026 Dongguan Runlu Motor Technology Co., Ltd. All rights reserved.
370 Brushless Outrunner 1300kv Drone Motor Stator Lamination Supplier
14 Pole Brushless Outrunner Motor Stator Lamination Supplier
Related Article
